Pedal Steel Guitar Half Tone Tuner Screw Emmons PP LeGrande and Others

  

Price will drop to normal when we get new stock. This is one of the type of 3 types of 1/2 tone tuning screws that Emmons Co used over the years. We've added the grooves on the screw head to make it easier to feel and use. If you have a need to add a half tone change to your PP or LeGrande, or the brass swivel ShoBud's and a few others then this will work. Comes with the 1/4 retaining ring and then you are ready.

Use on PP's, LeGrande with 4 hole bell cranks and some ShoBud, or any bell crank w/ 1/4 bell crank hole. Can drill a 1/4 hole on the 14 hole bell crank and others and it will do the job. Added some pictures to explain the correct use of a fibre washer, rarely used, if ever, by the factory cuz they used uncut springs. The reason for a fibre washer is so the cut spring end does not grab a swivel edge and not keep turning. This is not needed if the spring against the swivel is not cut, it won't grab.

Just used the cut end against the screw head and the uncut end against the swivel. A drop of oil on the screw threads and all is well. The added pictures show what we are meaning here. However, a washer will be on the tuning screws we send as shown. This ain't rocket science.

The item "Pedal Steel Guitar Half Tone Tuner Screw Emmons PP LeGrande and Others" is in sale since Wednesday, September 16, 2020. This item is in the category "Musical Instruments & Gear\Other Musical Instruments". The seller is "sauce4050" and is located in Crystal. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: Emmons others